Lincoln MKZ Forum

Lincoln MKZ Forum (https://www.mkzforum.com/forum/lincoln-mkz.php)
-   Warranty and Service Issues (https://www.mkzforum.com/forum/warranty-service-issues/)
-   -   Mkz power trunk assembly defect (https://www.mkzforum.com/forum/warranty-service-issues/5890-mkz-power-trunk-assembly-defect.html)

2013BLKMKZ 01-29-2015 03:01 PM

Mkz power trunk assembly defect
 
MKZ (2013-2015)-The left upper trunk lid tip rubs the rubber molding attached to the body upon closing and tears it. This rubber molding is supposed to guard the trunk lid tip against touching the car body. Instead, the trunk tip tears it and has caused minor paint to come off both on the tip and car body.

The dealer has replaced the rubber molding twice. They even tried gluing it. At first when I took it for repair, they mentioned that they had not seen this before. Now, they claim that all their cars on the lot have the same condition. The last time they replaced the molding they wrote on the service invoice: “ …CAUSE: REPLACE MOLDING TORN…999A REPLACE TRUNK MOLDING - COMPARED TO LIKE VEHICLES - WORKING AS DESIGNED…” I have asked them to readjust the trunk lid. They claim that it cannot be done. The service manager will not budge.

I filed a complaint with the Lincoln Motor Co. Representatives from the "Lincoln Client Relationship Center" contacted me twice.

They first contacted me and said they would send an "engineer" to look into this issue. A week later, they informed me that I "would not be happy to hear the results". The 'engineer' went to his local dealer and checked similar cars with the same issue and also consulted with his colleagues in charge of assembly. Conclusion: This occurs only in power trunk vehicles or as they put it, "many vehicles with power trunks have the same issue ." They denied my request to have the trunk realigned. They said that they hadn't received complaints about this issue and therefore NOTHING WOULD BE DONE about it. They said that only vehicles with "power trunks" were affected and that they would keep me in mind and contact me if anything could be done in the future. Apparently, they will not act unless they receive many complaints.

I want the trunk realigned so that it will operate without rubbing metal to metal and tearing the rubber molding. MKZ Club members have viewed and responded to my letters online: "TRUNK DESIGN FLAW?" and "BEWARE-POWER TRUNK OWNERS". As of the end of January 2015, I have had over 445 views and 15 replies from both articles and not one owner has the same issue that I have. It is puzzling that other owners do not have this issue, yet the dealer and manufacturer claim that "it is common". Obviously, there is an assembly error that causes this issue to some cars but not all. The car is under warranty and it has an assembly defect that must be addressed and corrected.

MKZFan 02-04-2015 11:01 AM

Some people might be in the same position as you, having this issue and the same frustrations with getting Lincoln to do something about it, but not making it known online.

Aside from publishing a written complaint like this you can also try to make a video talking about your issue, I have noticed for some people that has also helped in getting something done.

Good luck.




RothC 02-05-2015 10:35 AM

why do I have a feeling if it wasn't for them moving production to Mexico that we wouldn't have problems like this?

seems like things have been going downhill a bit ever since moving production further south.

MKZFan 02-09-2015 02:06 PM

Quote:

Originally Posted by RothC (Post 24713)
why do I have a feeling if it wasn't for them moving production to Mexico that we wouldn't have problems like this?

seems like things have been going downhill a bit ever since moving production further south.

that is something i'm not too sure about....

wouldn't they try to implement similar quality control standards as they would in the states?




RothC 02-11-2015 02:18 PM

Quote:

Originally Posted by MKZFan (Post 24729)
that is something i'm not too sure about....

wouldn't they try to implement similar quality control standards as they would in the states?

I hope.
But it is something to factor in here.

ictjohn 02-14-2015 05:50 PM

My 2015 MKZ Hybrid trunk lid does not pinch the rubber molding very hard, nor does it get close to the metal body. Sounds like there may be a need for an adjusting. According to my service tech, Lincoln sends along a gauge with each car for the dealer to check ALL body panel alignment upon arrival off of the transport. Nothing should get close enough for metal to metal contact.
I would reach out to Lincoln Client Relationship Center again even with photos to show the chip in the paint as well as the torn rubber molding.

bobcnj72 03-19-2018 10:05 AM

2015 mkz
 
I have a 2015 MKZ in Tuxedo Black and just noticed that the paint on the hood closet to the windshield is bubbling up and pealing. I am bringing it to the dealer this week to see if they will repair it. Keeping my fingers crossed!


All times are GMT -4. The time now is 05:57 AM.

Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome