Lincoln MKZ Forum banner

reverse light and brake strip not working

3K views 1 reply 2 participants last post by  Impulsersi 
#1 ·
2013 MKZ 3.7

I had some body work done and now my trunk's brake light strip on the bumper, (not the third brake light - that one works) and the reverse lights which appear to be on the same strip, do not work. It has to be some sort of power issue where something isn't connected. I can't seem to find a wiring diagram showing where all the connections are. Does anyone have a diagram or have some knowledge of where to look?

I tried taking the trunk's cover off with limited success, but didn't see anything hanging. I was only looking at the left side if that makes a difference.


I doubt it is a fuse since the 3rd brake light works, and I don't see one listed for the strip. I reseated the fuse #41 that indicates the reverse lights. There does not seem to be a way to tell if it is blown. I don't want to replace it unless I can at least test it somehow.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top